№ 131 · physics

How does a microwave heat water and not the plate?

A microwave heats the water in your food and leaves the plate cool. The plate is not shielded from the waves. A dish made of a very low-loss material simply absorbs little of them. Vollmer explains the mechanism: the oven's electric field flips billions of times a second, water molecules carry an electric dipole, and their lag behind that flipping field is what turns microwave energy into heat.

What a dipole is

Ling, Moebs and Sanny define a polar molecule as one with a permanent electric-dipole moment: a net separation of positive and negative charge. Water is polar. In a water molecule the electrons sit closer to the oxygen nucleus, so the oxygen end is slightly negative and the hydrogen end slightly positive. That built-in separation is the handle the microwave field grabs.

How the field delivers power

Microwaves are electromagnetic waves. Vollmer gives the household frequency as about 2.45 GHz, a wavelength of 12.23 cm. The oven's field oscillates, and a dipole tries to rotate to follow it. At low frequencies dipoles keep up. At microwave frequencies, Vollmer writes, molecular inertia and interactions with neighbours make the dipoles lag behind the field. That phase lag absorbs power from the field, which he calls dielectric loss due to dipole relaxation. Sun, Wang and Yue describe the same mechanism as dipolar polarization: the dipoles cannot respond fast enough, collide as they try, and dissipate power as heat.

The power absorbed rises with the frequency, with the imaginary part of the dielectric constant, written ε₂ and also called the loss factor, and with the square of the field strength inside the material. Vollmer notes that for pure water at 20 °C ε₂ peaks near 20 GHz, and that both parts of the dielectric constant drop and shift to higher frequencies as temperature rises.

Predict first

If the oven ran at 20 GHz instead of 2.45 GHz, where would the energy land?

Check your answer

In a thin surface layer. Vollmer says the absorption coefficient of water climbs steeply with frequency, so the penetration depth shrinks; at 20 GHz the energy would be absorbed near the surface, toasting the outside while the inside stays cold. The lower 2.45 GHz lets absorption happen throughout food-sized pieces.

Why the plate stays cool

Sun, Wang and Yue note that a few materials have loss factors so low that microwaves pass through them almost unweakened and reach very deep: high-purity quartz glass, for example, and non-polar benzene. A plate made of such a low-loss material lets the field pass. Being ceramic does not guarantee this: Sun, Wang and Yue cite Ripley's ceramic crucible, which strongly absorbs microwave energy, heats itself and then passes that heat to the sample it holds. Vollmer's power expression scales with the volume of dielectric and its loss factor, so a plate with a tiny loss factor absorbs almost nothing.

Why some things do heat

Water content is the main factor in how fast food heats, Vollmer says. Salt adds a second route: dissolved sodium and chloride ions move under the alternating field, collide with neighbours and produce heat, so salty food may heat faster than pure water. Ice is the opposite case. In ice the molecules are locked in a crystal lattice and cannot follow the field easily. At 2.45 GHz its loss factor is a thousand to ten thousand times smaller than liquid water's, so ice warms far more slowly.

Sun, Wang and Yue add that the magnetic part of the field also heats some materials, through eddy currents, hysteresis and resonance losses, and that bulk metals reflect microwaves rather than absorbing them. They note that the details of magnetic loss in metals at GHz frequencies are not fully understood.

Interactive Drag the frequency slider to see how water's loss factor ε₂ changes and how deep the waves reach before fading.

Left: loss factor ε₂ from a single relaxation model, peaking near 20 GHz. Right: penetration depth in metres, which falls as frequency rises (capped at 4 cm on the chart). The marker sits at the slider frequency. The dashed line marks the household 2.45 GHz. Values are a simplified model of water at 20 °C, so read the trend.

In short

The oven's field oscillates too fast for water's dipoles to keep up. Their lag converts field energy to heat. A plate made of a very low-loss material absorbs little, so the waves cross it and leave it cool.

Where this comes from

  1. Physics of the microwave oven linked only, not reproduced
    Vollmer · 2004
    www.sfu.ca/phys/346/121/resources/physics_of_microwave_ovens.pdf
  2. Review on Microwave-Matter Interaction Fundamentals and Efficient Microwave-Associated Heating Strategies linked only, not reproduced
    Sun, Wang, Yue · 2016
    pmc.ncbi.nlm.nih.gov/articles/PMC5502878
  3. University Physics Volume 2, 8.5 Molecular Model of a Dielectric linked only, not reproduced
    Ling, Moebs, Sanny · 2016
    openstax.org/books/university-physics-volume-2/pages/8-5-molecular-model-of-a-dielectric