№ 134 · earth science

Why does the ground move?

The ground moves because a fault that was stuck has slipped. Rock on both sides of the fault had been slowly bending, storing energy. When the bend finally beat the friction holding the fault shut, the rock snapped back toward its old shape and sent out waves. The surprise: the shaking is not the plates moving. It is stored strain being released.

What a fault is

The USGS defines an earthquake as two blocks of the earth slipping suddenly past each other. The surface they slip along is the fault, or fault plane. The point below ground where the slip starts is the hypocenter; the point on the surface directly above it is the epicenter.

Where the strain comes from

The crust and the uppermost mantle form a thin skin, and that skin is broken into pieces called tectonic plates. The USGS says the plates keep slowly moving, grinding past and into one another. The British Geological Survey (BGS) puts the speed at typically a few centimetres per year. Plate edges are rough, so they catch and hold while the plate's interior carries on moving. Strain is the bending that builds up while the stuck edge holds.

Predict first

While a fault edge is stuck, what happens to the energy from the plate's slow movement?

Check your answer

The USGS says while the edges are stuck, the energy that would have made the blocks slide builds up instead. When the moving blocks overcome the friction of the jagged edges, all that stored energy is released.

The snap: elastic rebound

Henry Fielding Reid, a professor of geology at Johns Hopkins University, worked this out from ground displacements measured after the 1906 earthquake, as the USGS recounts. His conclusion: the rock had been storing elastic stress, and the quake let it go in an “elastic rebound”. The BGS says Reid proposed the theory after the great 1906 San Francisco earthquake. Before the quake, stress builds and the rock on either side of the fault gradually deforms. When that deformation exceeds the friction holding the rocks together, slip occurs. The accumulated stress is released, and the rocks return to their original shape, now offset across the fault. The USGS notes that most earthquakes are the result of this sudden rebound.

From slip to shaking

The released energy spreads out from the fault every way at once as seismic waves, which the USGS compares to ripples on a pond. The waves shake the earth as they pass through it, and when they reach the surface they shake the ground and whatever stands on it. The USGS describes two wave types. P waves squeeze and stretch the material along the direction they travel. S waves move material back and forth perpendicular to their direction. P waves are faster, so they arrive first and the S waves follow.

Interactive Drag the slider to let the plate creep. The marker line bends as strain builds; press slip to release it, or let it build until it breaks on its own.

A straight marker line is built across the fault. Creep bends it; slip straightens it and leaves an offset. The bend is drawn far larger than real, and the slip is a single clean jump.

What is still argued

The BGS lists three proposed drivers of plate motion: convection currents in the mantle, ridge push and slab pull. It reports that research has shown slab pull is the main force behind most plate movement, because plates with more subducted edges move faster, while ridge push also appears in recent research. The BGS calls these competing theories. On prediction, the USGS is blunt: scientists cannot predict earthquakes, have tried many methods without success, and on any fault know another will come but not when. Whether weather affects earthquakes, and whether some animals or people can tell one is coming, are two questions that, in its words, “do not yet have definite answers.”

In short

Plates move a few centimetres a year. Rough edges stick, rock bends and stores strain, and when the bend beats friction the fault slips. The rock rebounds, and the released energy travels out as seismic waves that shake the ground.

Where this comes from

  1. The Science of Earthquakes linked only, not reproduced
    USGS Earthquake Hazards Program (Lisa Wald) · undated, accessed Oct · 2026
    www.usgs.gov/programs/earthquake-hazards/science-earthquakes
  2. Reid's Elastic Rebound Theory linked only, not reproduced
    USGS Earthquake Hazards Program · undated, accessed Oct · 2026
    earthquake.usgs.gov/earthquakes/events/1906calif/18april/reid.php
  3. What causes earthquakes? linked only, not reproduced
    British Geological Survey (first published 2020) · 2025
    www.bgs.ac.uk/discovering-geology/earth-hazards/earthquakes/what-causes-earthquakes/